This is first look at our upcoming module – Steps.
Steps is an analog Clock sequencer/processor. It takes clock signal and separates it into eight steps. Each step consists of one cycle where clock goes high and then low. Each cycle can be turned on or off, or it can be multiplied up to eight times with Burst mode.
Steps can also be used as a clock source as it has a built in clock generator that is normaled to clock input. With nothing pugged into clock input Steps will run by itself.
It outputs both gate and trigger signals and also has a clock passthrough output. If used as a clock source passthrough output will provide unprocessed clock signal.
In this patch Steps gets its clock signal from Keystep and sends it to Replicant ADSR that modulates Alisa VCF.