Calibration

Follow the steps in order with the module powered up. Tap a step to mark it done.

Some components aren’t placed

You haven’t marked these as placed yet:

Finish anyway, or go back and place them?

Build complete ✓

Every component is placed. A few checks before first power-up:

Final inspection

1. Double-check your work against the BOM and this guide.
2. Visually inspect solder joints for bridges or cold joints.
3. Ensure all components are securely attached to the PCB.

First power-up

1. Double-check the power connections and polarity before applying power.
2. Power on and test every function of the kit. Follow any calibration steps in your kit's documentation.

Questions? Contact your kit's manufacturer — and enjoy the build!